BenQ W6000, 2500 ANSI lumens, DLP, 1080p (1920x1080), 28 - 300", 39.4 - 570.9" (1 - 14.5 m), 31 - 92 kHz BenQ W6000. Projector brightness: 2500 ANSI lumens, Projection technology: DLP, Projector native resolution: 1080p (1920x1080). Light source type: Lamp, Service life of light source: 2000 h, Service life of light source (economic mode): 3000 h. Zoom ratio: 1.5:1. Analog signal format system: NTSC, PAL, SECAM, Supported video modes: 1080i, 1080p, 480i, 480p, 576i, 576p, 720p. Serial interface type: RS-232 https://www.projectorcentral.com/benq_w6000_home_theater_projector_review.htm The BenQ W6000, at its factory default settings, is a bit of an ugly duckling. Contrast and brightness are out of alignment, as are color balance and saturation. Sharpness is too high. However, with a little perseverance and some remote-control kung-fu... The BenQ W6000, at factory default settings, is a bit of an ugly duckling. Contrast and brightness are out of alignment, as are color balance and saturation. Sharpness is too high. However, with a little perseverance and some remote-control kung-fu, i... September 2009 - Art Feierman The BenQ W6000 was intended to be the brightest projector anywhere near its price for movie watching, and theres no doubt it delivers on that. Few home theater projectors under $10,000 can match the "best mode" brightn... You may have reasons for scratching the W6000 from your shopping list, but certainly its a projector that should be considered. Its got very good blacks, though not the best in class, but its sharper than most of the competition, and in "best" mod...