Pulsar Extreme 1000C - 1000VA
On-line double-conversion technology
This technology guarantees a consistently high level of power quality. Whatever the disturbances on the distribution system, the waveform is regenerated via the AC to DC then DC to AC conversion process. The battery is used only as a backup source.
Wide input-voltage range
Pulsar EXtreme has very wide input-voltage tolerances from 84 to 264 V to reduce the number of transfers to battery power while maintaining constant output voltage.In this way the batteries are used only for the most serious incidents, maximizing available backup time and extending battery life.
Cold start on battery power
This function ensures trouble-free start-up of your applications even during a utility power outage.
Maintenance on the "Hot-swap"' and "Install" versions is possible with the UPS energized and the applications still supplied with power.
In the event of an overload or UPS fault, Pulsar EXtreme and Comet EXtreme automatically transfer the load to utility AC power.
High-performance battery charger
The Pulsar EXtreme and Comet EXtreme battery charger:
reduces battery recharge time (80% backup time recovered in two hours),
increases the service life of the battery by taking into account manufacturer parameters, ambient temperature and battery aging,
protects the battery against damage caused by deep discharge,
avoids disturbances on the distribution system by correcting the power factor,
avoids propagading faults on the distribution system (backfeed protection).
The RS232 link is available for easy connection of the UPS to the server. It may be used for:
personalization of Pulsar EXtreme and Comet EXtreme by modifying the factory-set parameters (output voltage, intervals between battery tests, operation on bypass, etc.) via UPS-Driver software.
local or remote administration of the UPS and the protected servers.
Lets you add a USB, Network Management card, JBus, Relay contact, etc. communication card. The cards make UPS communication totally independent. For example, they keep you informed of UPS status when the server is shut down
Eaton Pulsar EX1000C 1000VA, 1000 VA, 700 W, 0 - 40 °C, USB, 15.7 x 9.27 x 5.71" (400 x 235.5 x 145 mm)
Eaton Pulsar EX1000C 1000VA. Output power capacity: 1000 VA, Output power: 700 W. Interface: USB, Dimensions (WxDxH): 15.7 x 9.27 x 5.71" (400 x 235.5 x 145 mm)