8 x 10/100 RJ-45 PoE, 1 x 10/100 Uplink, 120W, 1Gbps, 2K MAC, 1.34 M/pps, 850 g
The LevelOne FEP-0931 is an 9-port Fast Ethernet PoE switch that provides Power over Ethernet on eight of its ports. Per PoE port a power supply of up to 30W is possible. The total PoE power budget is 120W. Distances up to 250m at 10Mbps is supported. It is the ideal solution when office and home users who wants to power ip cameras at long distances or using a combination of PoE and non-PoE devices.
The FEP-0931 eight PoE-enabled ports make it an ideal solution for users who use PoE-enabled devices and already want to power a larger number of PoE devices. These products can be a mix of PoE IP phones, PoE Wifi APs and PoE IP cams. It is the perfect solution for offices that want to upgrade their office equipment and LAN infrastructure to PoE capability or upgrade their existing PoE infrastructure to Gigabit speed. The switch automatically detects the connected IEEE 802.3at/af standard device and provides these devices with power and data over a single cable.
The FEP-0931 also enables users to provide a stable and reliable high-speed LAN environment with store-and-forward switching architecture, packet error filtering and blockade-free packet forwarding. The 802.3x flow control mechanisms operate in both full and half duplex modes. This switch also supports the N-Way auto negotiation protocol, which automatically detects network speed and duplex mode.
For instant fault detection, the FEP-0931 is equipped with a complete set of LEDs to help monitor and troubleshoot the network.
LevelOne FEP-0931, Fast Ethernet (10/100), Full duplex, Power over Ethernet (PoE) Support
LevelOne FEP-0931. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 8, Console port: RJ-45. Full duplex. MAC address table: 2000 entries, Switching capacity: 1800 Gbit/s. Network standard: IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x. Power over Ethernet (PoE) Support
