StarTech.com logo

StarTech.com PEXUSB3S44V interface cards/adapter Internal USB 3.2 Gen 1 (3.1 Gen 1)

Data-sheet quality:
created/standardized by Icecat
Product views:
372349
Info modified on:
06 Sept 2024, 14:32:21
Bullet Points StarTech.com PEXUSB3S44V interface cards/adapter Internal USB 3.2 Gen 1 (3.1 Gen 1):
  • - Provides four external, independent USB 3.0 Ports
  • - Supports up to 20 Gbps total transfer bandwidth - Up to 5 Gbps per port
  • - UASP support across all four ports
  • - PCIe x4 interface compliant with PCI Express 2.0 specifications
  • - Optional LP4 or SATA power connector provides up to 900mA per USB port
  • - Supports USB Battery Charging Specification 1.2 (Apple Mode only)
  • - Fully compliant with USB 3.0 rev 1.0 and Intel xHCI rev 1.0 specifications
  • - Backward compatible with USB 2.0 and USB 1.0/1.1 devices
  • - Includes a Low Profile/half-height installation bracket
  • - Hot-swap feature to connect/disconnect devices without powering down the system
Warranty:
2 Years
Long product name StarTech.com PEXUSB3S44V interface cards/adapter Internal USB 3.2 Gen 1 (3.1 Gen 1):

StarTech.com 4 Port USB 3.0 PCIe Card w/ 4 Dedicated 5Gbps Channels (USB 3.1 Gen 1) - UASP - SATA / LP4 Power - PCI Express Adapter Card (PEXUSB3S44V)

StarTech.com PEXUSB3S44V interface cards/adapter Internal USB 3.2 Gen 1 (3.1 Gen 1):

Add four USB 3.0 (USB 3.2 Gen 1) ports with four independent channels, LP/SATA power, and charging support to your PC through a PCI Express slot

The PEXUSB3S44V 4-Port PCI Express USB 3.2 Gen 1 Card lets you add four, dedicated 5 Gbps USB 3.2 Gen 1 ports to your PCIe x4-enabled PC. This independent port architecture improves USB 3.2 Gen 1 performance by transferring data on four individual channels to your computer, giving you faster file transfers.

When multiple devices are connected, traditional single bus USB 3.2 Gen 1 cards share your maximum bandwidth between all ports. By employing four host controller chipsets, each port operates on a separate independent transmission channel. Dedicating up to 5 Gbps to each USB port reduces performance bottlenecks, and effectively quadruples your total available to bandwidth to 20 Gbps.

Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.2 Gen 1 controller performs up to 70% faster than conventional USB 3.2 Gen 1 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.

For high-power USB devices, this PCIe USB 3.2 Gen 1 card includes an optional SATA or LP4 power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.2 Gen 1 bus-powered devices (500mA for USB 2.0). The USB 3.2 Gen 1 card also supports USB Battery Charging Specification 1.2 (Apple Mode only), letting you charge compatible Apple devices (iPhones and iPads) faster than a standard USB 3.2 Gen 1 port.

The controller card is compliant with USB 3.2 Gen 1 standards while offering backward compatibility with existing USB 2.0 / 1.1 devices. For added versatility, the USB 3.2 Gen 1 PCIe card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows® 8, 8.1, Server 2012 and Linux kernel 2.6.37 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.2 Gen 1 at peak performance.

At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.

Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.2 Gen 1 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.

The StarTech.com Advantage

Short summary description StarTech.com PEXUSB3S44V interface cards/adapter Internal USB 3.2 Gen 1 (3.1 Gen 1):

StarTech.com PEXUSB3S44V, PCIe, USB 3.2 Gen 1 (3.1 Gen 1), Full-height / Low-profile, PCIe 2.0, Black, 3 m

Long summary description StarTech.com PEXUSB3S44V interface cards/adapter Internal USB 3.2 Gen 1 (3.1 Gen 1):

StarTech.com PEXUSB3S44V. Host interface: PCIe, Output interface: USB 3.2 Gen 1 (3.1 Gen 1), Expansion card form factor: Full-height / Low-profile. Product colour: Black, Maximum cable length: 3 m. Chipset: Renesas/NEC - µPD720202, Data transfer rate (max): 20 Gbit/s. Windows operating systems supported: Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10..., Server operating systems supported: Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows.... Width: 15 mm, Depth: 167 mm, Height: 120 mm

Video
Specs
Recommended products
Distributors
Loading...
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.