- Brand : Tripp Lite
- Product name : SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets
- Product code : SMART1000RM2UL
- GTIN (EAN/UPC) : 0037332213099
- Category : Uninterruptible Power Supplies (UPSs)
- Data-sheet quality : created/standardized by Icecat
- Product views : 38768
- Info modified on : 11 Aug 2024 07:43:35
- Product Brochure/Datasheet (0.2 MB)
- Warranty: : 5-year limited warranty
-
Long product name Tripp Lite SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets
:
SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets
-
Tripp Lite SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets
:
Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery
This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.
120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures
The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.
Automatic Voltage Regulation (AVR) Conserves Battery Power
With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V–147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.
6 Outlets Protect Your Mission-Critical Rack Equipment
Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.
Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
High Efficiency Helps the Environment and Your Cash Flow
Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.
Advanced Communications Ports Connect to Any Workstation or Server
USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite’s free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.
Optional Network Management Cards Allow Detailed Monitoring of Conditions
The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.
Multi-Function LCD and Audible Alarms Keep You Informed
The front-panel LCD information and configuration screen displays detailed UPS and site power status and operating data, as well as input and output voltage, operating mode, alarm function and additional options. An alarm sounds to warn you of power failure, low battery, overload, UPS fault and remote shutdown conditions. The LCD screen rotates for easy viewing in rack-mount or tower configuration.
Versatile Installation Options
Hardware is included for mounting the Tripp Lite SmartPro UPS system in 2U of space in an EIA-standard 19-inch 4-post rack. Use the 2POSTRMKITWM (sold separately) for 2-post rack mounting or wall mounting or the UPSHDEARKIT (sold separately) for 2-post front-mount installation. Use the 2-9USTAND (sold separately) for mounting in an upright tower position. A 10-foot power cord with NEMA 5-15P plug connects the SMART1000RM2UL to a compatible AC power source.
Typical Applications
- Deliver regulated sine wave output to connected equipment in a network closet or small-business network
- Protect point-of-sale and VoIP networks against power surges and spikes
- Keep your server room operational during short power failures and allow time for safe shutdowns during longer blackouts
- Back up servers, network storage devices, telecom hardware and other applications where long battery lifespan is critical
- Provide high-level power protection with a low-maintenance design
Package Includes
- SMART1000RM2UL SmartPro UPS, Lithium Battery Backup
- USB cable
- DB9 cable
- EPO cable
- Rack-mounting hardware
- Owner’s manual -
Short summary description Tripp Lite SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets
:
Tripp Lite SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets, Line-Interactive, 1 kVA, 800 W, Sine, 110 V, 120 V
-
Long summary description Tripp Lite SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets
:
Tripp Lite SmartPro UPS, Lithium Battery Backup - 120V, 1kVA, 800W, Line Interactive, 2U, Sine Wave, LCD, 6 Outlets. UPS topology: Line-Interactive, Output power capacity: 1 kVA, Output power: 800 W. AC outlet types: NEMA 5–15P, NEMA 5–15R, Power plug: NEMA 5-15P, AC outlets quantity: 6 AC outlet(s). Battery voltage: 24 V, Typical backup time at full load: 5.3 min, Typical backup time at half load: 15 min. Form factor: Rackmount, Product colour: Black, Rack capacity: 2U. Width: 440.7 mm, Depth: 317.5 mm, Height: 88.9 mm
Features | |
---|---|
UPS topology | Line-Interactive |
Output power capacity | 1 kVA |
Output power | 800 W |
Waveform | Sine |
Input operation voltage (min) | 110 V |
Input operation voltage (max) | 120 V |
Input frequency | 60 Hz |
Output operation voltage (min) | 110 V |
Output operation voltage (max) | 120 V |
Output frequency regulation | 60 Hz |
Output voltage regulation | -21 - 8% |
Maximum current | 15 A |
Surge energy rating | 570 J |
Efficiency | 95% |
Power factor | 0.8 |
Emergency Power Off (EPO) | |
EMI/RFI noise filtering | |
Noise level | 45.5 dB |
Surge protection | |
Audible alarm(s) | |
Country of origin | China |
Ports & interfaces | |
---|---|
AC outlet types | NEMA 5–15P, NEMA 5–15R |
Power plug | NEMA 5-15P |
AC outlets quantity | 6 AC outlet(s) |
USB 2.0 ports quantity | 1 |
Serial ports quantity | 1 |
Battery | |
---|---|
Battery voltage | 24 V |
Typical backup time at full load | 5.3 min |
Typical backup time at half load | 15 min |
Battery recharge time | 4 h |
Hot-swap battery |
Battery | |
---|---|
Cold start |
Design | |
---|---|
Form factor | Rackmount |
Rack capacity | 2U |
Cable length | 3 m |
Product colour | Black |
Display type | LCD |
LED indicators | |
Certification | Meets FCC Part 15 Category B (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) |
Operational conditions | |
---|---|
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -15 - 50 °C |
Operating relative humidity (H-H) | 0 - 95% |
Technical details | |
---|---|
Compliance certificates | RoHS |
Weight & dimensions | |
---|---|
Width | 440.7 mm |
Depth | 317.5 mm |
Height | 88.9 mm |
Weight | 7.39 kg |
Package width | 469.9 mm |
Package depth | 591.8 mm |
Package height | 221 mm |
Package weight | 17.9 kg |
Packaging data | |
---|---|
Rack mount kit | |
Manual |
Logistics data | |
---|---|
Master (outer) case width | 469.9 mm |
Master (outer) case length | 591.8 mm |
Master (outer) case height | 221 mm |
Master (outer) case gross weight | 17.9 kg |
Products per master (outer) case | 1 pc(s) |
Country | Distributor |
---|---|
|
1 distributor(s) |