P-2002 - VoIP Analog Telephone Adapter
ZyXEL P-2002 ATA series supports standard SIP (RFC 3261), which is suitable for IP telephony service deployment and addresses the needs of users who are connecting to emerging SIP-based communication networks.
Easy to Deploy
The P-2002 ATA series supports multiple methods of configuration including Web-based configuration, Telnet management, and TFTP Auto-Provisioning. It eliminates the time and effort associated with complicated installation procedures.
Multiple SIP and Voice Channels
Based on the flexible VoIP technology platform, one or more SIP phone number may be configured with the P-2002 ATA series. Each SIP phone number can be freely assigned to either phone port individually, or to both ports at the same time.
By using the P-2002 ATA series to deploy VoIP service, service providers need only provide a minimum of one SIP number to each subscriber. Billing and service deployment are simplified by allowing subscribers to use two phones with the same SIP number. If one telephone is in use, users may use a secondary telephone to place a call while using the same SIP number. Additionally, users may also receive incoming calls even when the SIP number is in use.
The advantages of the P- 2002 ATA series include increased traffic and service revenue.
The P-2002 ATA series turns a traditional phone into an IP phone device at a very low cost. Not only does the P-2002 ATA series deliver VoIP service at a low per-port cost but the built-in two-port Ethernet switch also allows users to connect their PC to the reserve Ethernet port without adding an extra Ethernet switch or hub.
ZyXEL 2002, Prestige. Supported network protocols: PPPoE, VoIP protocols: SIP (RFC 3261) v2, SDP (RFC 2327), RTP (RFC1889), RTCP (RFC1890). Weight: 11 oz (312 g). Interface: 10M/100M Auto MDI/MDIX, Power requirements: 12V AC, Dimensions (WxDxH): 7.09 x 5.04 x 1.44" (180 x 128 x 36.5 mm)