One power supply, fan assembly and switching fabric pre-installed
The backplane is passive (contains no active components) for the highest reliability
IP and IPX routing
Supports IEEE 802.3ae 10Gigabit modules for high-speed inter-switch connections
Thermal shutdown: temperature sensors allow the system to shut down modules (including the switch fabric module) on a per slot basis if the temperature exceeds parameters. Operating temperatures are set for the modules individually, allowing less critical modules to shut down first.
Switch fabric supports an optional sub-module for additional Gigabit (1000BASE-T or 1000BASE-X GBIC ports) connections.
For enhanced graphical management with extended functionality, 3Com Switch Manager, available for purchase with 3Com Network Administrator or 3Com Network Director, is recommended. For smaller networks, graphical management of the switch can be done with 3Com Network Supervisor.
SWITCH 7700 4-SLOT AC 64 GBPS STARTER KIT ML (NMS)
3com SWITCH 7700 4-SLOT. Maximum data transfer rate: 0.1 Gbit/s. Management protocols: 1000BASE-X (via SFPs or GBICs), 1000BASE-T (RJ-45), 10/100BASE-TX (RJ-45), 100BASE-FX (MT-RJ); inter, Switching protocols: STP/RSTP, GARP/GVRP/GMRP, IGMP, ARP/Proxy ARP, DHCP, RIP-1, RIP-2. Power consumption (typical): 550 W. Dimensions (WxDxH): 17.2 x 18.9 x 13.9" (436 x 480 x 352 mm)