XEED WUX10 Mark II Medical, LCOS, 1920x1200 (WUXGA), ANSI 3200, 16:10, 275W NSHA, DVI-I/HDMI/RJ-45

Native WUXGA resolution and Full HD capability
Projecting at WUXGA resolution (1920 x 1200 pixels), the XEED WUX10 Mark II Medical offers outstanding imaging power – reproducing bright, high contrast widescreen computer images and Full HD video (1080p). Canon LCOS technology overcomes conventional projection limitations, reproducing fine detail without the unwanted “lattice” or “rainbow” effects.

Exceptional brightness and contrast
The XEED WUX10 Mark II Medical employs Canon’s AISYS optical system to deliver sharp, clear images at a powerful 3200 lumens. AISYS optimises the light path to get the most from a highly efficient AC projector lamp, for results that cut through high levels of ambient light. In addition, the Canon AISYS system also yields a high 1000:1 contrast ratio, for faithful reproduction of every subtle gradation in the source image.

Easy placement
The WUX10 Mark II Medical is fitted with a Canon 1.5x powered zoom projection lens, specially designed to combat distortion and deliver exacting image geometry. A 10:0 lens offset makes installation exceptionally easy.

DICOM Preset image mode
The WUX10 Mark II Medical features a special ‘DICOM Preset’ image mode, ideal for the reproduction of greyscale medical images such as X-rays. The feature offers a choice of 21 different presets, ideal for conferences, medical training and other non-diagnostic applications.

Fully automatic set-up
At the touch of a button, the projector automatically configures four key settings: Focus, Keystone Correction, Input Selection and Screen Colour Correction. Settings are accurately adjusted in seconds, leaving you free to concentrate on your presentation.

High Definition connectivity
Designed for use with HD sources, the WUX10 Mark II Medical features a DVI terminal and an HDMITM Connector, with full HDCP support.

Integrated networking
With its on-board RJ-45 port, the WUX10 Mark II Medical can be connected directly to a network for control and monitoring. This makes it ideal for integration with AV control systems.

Quiet operation
Running at levels of just 32dBA in Quiet Mode, this projector won’t distract your audience with unwanted fan noise. Quiet Mode also extends lamp lifetime, up to a maximum of 3000 hours.

Convenient portability
With a portable design weighing just 5.0kg, the WUX10 Mark II Medical offers outstanding projection power in an exceptionally convenient, compact form.

Canon XEED WUX10 Mark II, 3200 ANSI lumens, LCOS, WUXGA (1920x1200), 1000:1, 16:10, 1016 - 7620 mm (40 - 300")

Canon XEED WUX10 Mark II. Projector brightness: 3200 ANSI lumens, Projection technology: LCOS, Projector native resolution: WUXGA (1920x1200). Light source type: Lamp, Lamp type: NSH, Lamp power: 275 W. Focus: Manual, Focal length range: 21.8 - 31.9 mm, Aperture range (F-F): 1.85 - 2.65. Analog signal format system: NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM, Supported graphics resolutions: 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1680 x 1050..., Supported video modes: 1080i, 1080p, 480p, 576p, 720p. Noise level: 36 dB, Noise level (economic mode): 32 dB, Dot clock scanning frequency: 170 MHz